www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
44 |
GB
Measured sound pressure level L
pA
99,6 dB(A)
Uncertainty K
pA
3 dB
Guaranteed sound power level L
wA
114 dB(A)
Measured sound power level L
wA
110,3 dB(A)
Uncertainty K
wA
3 dB
Vibration Front handle
6,72 m/s²
Vibration Rear handle
6,38 m/s²
Uncertainty
1.5 m/s²
7.
Before starting up
m
CAUTION!:
Start the engine only when the saw is
fully assembled.
m
CAUTION!:
When handling the chain always wear
protective gloves.
Assembling the bar, and the chain
(Fig.3-6)
Open the box and assemble the bar and chain as fol-
lows:
1. Press the front hand guard back (Fig.14/Pos.3a)
so that the chain brake is disabled.
2. Loosen the two nuts (B) and remove the cover
(17) and spacer (A).
3. Mounting the stopper claw (Fig.3)
Insert the stopper claw (19) into the recesses of
the housing (see Fig. 3) and secure with the 2 fix-
ing screws (19a). Use the tool supplied with the
assembly tools (10).
4. Slide the chain around the sprocket, next slide
the saw chain around the bar. Pay attention to the
installation direction of the chain. (Fig.4-5)
5. Insert the chain tensioning screw (Z) into the low-
er hole of the chain bar (Y). (Fig.4)
6. Install the cover (17) and tighten the nuts (B) by
hand.
Installation direction of the chain (shown Fig.5)
Tensioning the chain (Fig.6-8)
1. Hold the front part tight with your hand.
2. Adjust the chain tension using the tension screw
(C) so that the chain rests entirely on the bar, but
not under great tension.
3. Tighten the mounting nut (B) for the bar with the
key (12-15 Nm).
4. Check with your hand that the chain runs smooth-
ly on the rail and has the proper voltage.
5. Where necessary, set up the chain tension.
6.
Technical data
Machine without guide
bar L x W x H
375
x 182 x 190 mm
Weight without guide
bar and saw chain and
empty tank
5.5 kg
Weight with guide bar
and saw chain and emp-
ty tank
7.0 kg
Cutting Length
47 cm
Guide bar length
51 c
m
Automatic chain oiling
ja
Saw chain Oil
Special
Saw chain oil
Saw chain oil tank
capacity
260 cm
3
Saw chain division
8,255 mm (0.325″)
Drive link thickness
1.5 mm (0,058”)
Saw chain type
Oregon
21BPX078X
Number of teeths drive
sprocket
7
Tooth pitch of drive
sprocket
8,255 mm (0.325″)
Chain brake
yes
Guide bar type
Oregon
208PXBK095
Saw chain speed max.
22
m/s
Motor
1 cylinder 2 stroke
air cooled
Engine capacity
56 cm³
Maximum motor capacity
2,3 kW
Idle speed
3300
±2
00
rpm
Maximum speed with
cutting attachment
11000
rpm
Fuel tank capacity
550 cm
3
Fuel type
mix 40:1
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect working
order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Heruntergeladen von
Handbücher-Suchmachiene
