www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
6
|
GB
2. Intended use
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac
-
turer will be liable for any damage or injuries of any
kind caused as a result of this.
To use the equipment properly you must also ob
-
serve the safety information, the assembly instruc
-
tions and the operating instructions to be found in
this manual.
All persons who use and service the equipment have
to be acquainted with this manual and must be in
-
formed about the equipment’s potential hazards. It
is also imperative to observe the accident prevention
regulations in force in your area. The same applies
for the general rules of health and safety at work.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes.
Please note that our equipment has not been de
-
signed for use in commercial, trade or industrial appli
-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.
3.
Safety information
•
Check the sawhorse for damage each time before
use.
•
Always ensure the sawhorse is secure when set
-
ting it up.
•
Always ensure that you assume a natural and safe
standing position when working.
•
Do not overload the sawhorse! Do not use the saw
-
horse for purposes for which it is not intended.
•
Modifications or unauthorised changes to the saw
-
horse as well as the use of unapproved parts is for
-
bidden.
•
All parts of the sawhorse, in particular the safety
devices, must be correctly mounted in order to
guarantee trouble-free operation.
•
Keep the sawhorse out of reach of children.
•
Store the sawhorse in a location that is inaccessi
-
ble to unauthorised persons and children.
1
When lifting the sawhorse, appropriate lifting
techniques must be used to prevent injury.
2
Ensure that the work area is well lit during work.
3
Ensure that the sawhorse is placed on a flat sur
-
face that is clear, dry and free of debris.
4
Ensure that all 4 legs have firm contact with the
floor. If the sawhorse is not level and straight,
loads placed on it may fall and possibly cause
damage to the object loaded on it, resulting in
serious injury or death.
1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified.
We recommend:
Read through the complete text in the operating in
-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord
-
ance with the recommendations.
The operating instructions contain important informa
-
tion on how to operate the machine safely, profes
-
sionally and economically, how to avoid danger, cost
-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula
-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma
-
chine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob
-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
