www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB
| 25
14. Troubleshooting
Fault
Possible cause
Remedy
Engine does not start
Automatic oil cut-out has not responded
Check oil level, top up engine oil
Spark plug fouled
Clean or replace spark plug
No fuel
Refuel / have the petrol cock checked
Generator has too little or no
voltage
Electronic defective
Contact your dealer
Over-current circuit-breaker has trig-
gered
Actuate the circuit-breaker and reduce
the consumers
Air filter dirty
Clean or replace the filter
15.
Maintenance schedule
Please adhere to the following maintenance periods in order to ensure a failure-free operation.
IMPORTANT! The equipment must be filled with engine oil and fuel before it is started.
Before each use
After an operating
period of 20 hours
After an oper-
ating period of
50 hours
After an operat-
ing period of 100
hours
After an
operating
period of
300 hours
Checking the engine oil
X
Changing the engine oil
For the first time,
then every 50
hours
X
Checking the air filter
X
Change the
filter insert if
necessary
Cleaning the air filter
X
Cleaning the petrol filter
X
Visual inspection of the
equipment
X
Cleaning the spark plug
Distance: 0.6
mm, replace if
necessary
Checking andreadjust-
ing the throttle vale on
the carburetor
X*
Cleaning the cylinder
head
X*
Set the valve play
X*
Important: The positions marked with “x*“ should only be carried out by an authorized dealer.
