www.scheppach.com
46 | GB
5. Safety instructions
m
Attention!
The following basic safety measures must be observed when using electric
tools for protection against electric shock, and the risk of injury and fire. Read all these
notices before using the electric tool and keep the safety instructions for later reference.
Service and maintenance
Regular cleaning, maintenance and lubrication.
Always pull the electrical plug before
any adjustment, maintenance or repair.
Have your device repaired only by qualified experts and only with original replace
-
ment parts.
This ensures the continued safety of the device.
Safe work
1 Keep the work area orderly
–
Disorder in the work area can lead to accidents.
2
Take environmental influences into account
–
Do not expose electric tools to rain.
–
Do not use electric tools in a damp or wet environment. There is a risk of electric
shock!
–
Make sure that the work area is well-illuminated.
–
Do not use electric tools where there is a risk of fire or explosion.
3 Protect yourself from electric shock
–
Avoid physical contact with earthed parts (e.g. pipes, radiators, electric ranges,
cooling units).
4 Keep children away
–
Do not allow other persons to touch the equipment or cable, keep them away from
your work area.
5 Securely store unused electric tools
–
Unused electric tools should be stored in a dry, elevated or closed location out of
the reach of children.
6 Do not overload your electric tool
–
They work better and more safely in the specified output range.
7 Wear suitable clothing
–
Do not wear wide clothing or jewellery, which can become entangled in moving parts.
–
Rubber gloves and non-slip shoes are recommended when working outdoors.
–
Tie long hair back in a hair net.
8 Do not use the cable for purposes for which it is not intended
–
Do not use the cable to pull the plug out of the outlet. Protect the cable from heat,
oil and sharp edges.
9 Take care of your tools
–
Keep your compressor clean in order to work well and safely.
