Scheppach 5905217901, Original Instruction Manual

Page: 22 / 132


www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
22 | GB
Characteristic noise emission values
sound power level L
WA
83,8 dB (A)
sound pressure level L
pA
70,3 dB (A)
uncertainly K
WA/pA
1,5 dB
*S3, periodic intermittent operation without influence
of the starting process on the motor heating. Identical
duty cycles with a period at load followed by a peri-
od at no load. Running time 10 minutes; duty cycle is
50% of the running time.
Pressure:
The performance level of the built-in hydraulic pump
can reach a short-term pressure level for a splitting
force of up to 5 tons. In the basic setting, hydraulic
splitters are set at the factory to an approx. 10% low-
er output level. For safety reasons, the basic settings
must not be changed by the user. Please note that
external circumstances such as operating and ambi-
ent temperature, air pressure and moisture affect the
viscosity of the hydraulic oil. In addition, manufactur-
ing tolerances and maintenance errors can affect the
reachable pressure level.
8. Unpacking
• Open the packaging and remove the device care -
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• In case of complaints the dealer must be informed
immediately. Subsequent complaints will not be ac-
cepted.
• If possible, store the packaging until the warranty
period has expired.
• Read the operating manual to make yourself famil-
iar with the device prior to using it.
• Only use original parts for accessories as well as
for wearing and spare parts. Spare parts are avail -
able from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
m
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas -
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
Remaining hazards
The machine has been built using modern tech -
nology in accordance with recognized safety
rules. Some remaining hazards, however, may
still exist.
• The splitting tool can cause injuries to fingers and
hands if the wood is incorrectly guided or support-
ed.
• Thrown pieces can lead to injury if the work piece
is not correctly placed or held.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper -
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not
press the start button while inserting the plug into
the socket.
• Use the tools recommended in this manual to ob-
tain the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
7. Technical data
Dimensions L x W x H 1100 x 380 x 640 mm
Wood ø min. - max . 50 - 25 0 mm
Wood length min.- max . 150 - 520 mm
Weight approx. 55 kg
Motor 230 V~ / 50 Hz
Input power 2300 W
Rating S3 50 %
Splitting Power max. 5 t
Cylinder rise 400 mm
Cylinder speed (fast fwd.) 37 mm/sec
Cylinder speed (return) 70 mm/sec
Hydraulic fluid capacity 4,2 l
Operating pressure 240 bar
Motor speed 2800 1/min
Subject to technical changes!
Noise
m
Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.