www.scheppach.com
GB | 49
17. Troubleshooting
Fault
Possible cause
Remedy
Motor does not start
• No power
• Switch, capacitor defective
• Electrical extension lead faulty
• Open housing cover (limit switch)
• Motor, cable or plug defective,
fuses burnt
•
Check the mains fuse
• Have checked by an electrician
• Unplug the mains fuse, check,
replace if necessary
•
Close housing cover precisely
• Arrange for inspection of the machine
by a specialist. Never repair the motor
yourself. Danger!
Check fuses and
replace as necessary
Saw band doesn’t move
• No power
• V-belt torn
• Motor, cable or plug defective,
fuses burnt
•
Check the mains fuse
• Have checked by an electrician
• Arrange for inspection of the machine
by a specialist. Never repair the motor
yourself. Danger!
Check fuses and
replace as necessary
Incorrect turning direction
for motor
• Incorrect connection
•
Change direction of rotation on CEE
connector
Saw band drifting
• Guide incorrectly adjusted
• Incorrect saw band
• Adjusting the saw band guide correct-
ly (see 9.12)
• Select the correct saw band (see
chapter 15)
Burn marks on the wood
when working
• Saw band blunt
• Incorrect saw band
• Replace saw band
• Select the correct saw band (see
chapter 15)
Saw band jams when work-
ing
• Saw band blunt
• Saw band resinous
• Guide incorrectly adjusted
• Replace saw band
•
Clean saw band
• Adjusting the saw band guide correct-
ly (see 9.12)
The engine runs slowly and
does not reach the operating
speed.
• Voltage too low, coils damaged,
capacitor burnt
• Arrange for inspection of the motor by
a specialist. Arrange for replacement
of the capacitor by a specialist.
Motor makes excessive
noise
•
Coils damaged, motor defective
• Arrange for inspection of the motor by
a specialist.
The motor does not reach its
full power.
•
Circuits in the network are overload
-
ed (lamps, other motors, etc.)
• Do not use any other equipment or
motors on the same circuit.
Motor overheats easily.
•
Overloading of the motor, insufficient
cooling of the motor
• Avoid overloading the motor while
cutting. remove dust from the motor
in order to ensure optimal cooling of
the motor.
Summary of Contents for 59015019969
