www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB
| 23
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
2.
Device description (fig. 1-22)
1.
Handle
2. ON/OFF switch
3. Lock switch
4.
Machine head
5.
Moving saw blade guard
6. Saw blade
7. Clamping device
7a. Star-grip screw
7b. Quick lock button
8.
Workpiece support
9. Set screw for workpiece support
10. Table insert
11. Locking handle
12. Pointer
13. Scale
14.
Rotary table
15. Fixed saw table
16. Stop rail
16a.
Movable stop rail
16b. Set screw
17. Chip collection bag
18. Scale
19. Pointer
20. Set screw for drag guide
21. Drag guide
22. Set screw
23. Locking bolt
24. Screw for cutting depth limiting
24a. Knurled nut
25. Stop for cutting depth limiting
26.
Adjusting screw (90°)
26a. Locknut
27.
Adjusting screw (45°)
27a. Locknut
28. Flange screw
29.
Outer flange
30. Saw shaft lock
31.
Inner flange
32. Laser
33. ON/OFF switch laser
34. Latched position lever
35. Tilt protection
36. Adjusting screw
37. Cable holder
38. Speed selector switch
A.) 90° stop angle (not supplied)
B.) 45° stop angle (not supplied)
C.) Allen key, 6 mm
D.) Philips head screw (Laser)
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
• Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
•
A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating instruc
-
tions before installing and commissioning the device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes
-
sionally and economically, how to avoid danger, cost
-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu
-
lations that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who were
instructed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.
In addition to the safety instructions contained in this op
-
erating manual and the specific regulations of your coun
-
try, the technical rules generally accepted for the oper
-
ation of machines of the same type must be observed.
Summary of Contents for 5901219901
Page 20: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 20 DE...
Page 164: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 164...
Page 165: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 165...
Page 166: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 166...
