Scheppach 5801304903, Translation From The Original Instruction Manual

Page: 31 / 64

31 GB І 31
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly
disposing of this product, you are also contributing
to the effective use of natural resources. You can
obtain information on collection points for waste
equipment from your municipal administration, pub-
lic waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.
AC motor
• The mains voltage must be 230-240 V~
•
Extension cables up to 25 m long must have a
cross-section of 1.5 mm
2
.
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
15. Disposal and recycling
The equipment is supplied in packaging to prevent
it from being damaged in transit. The raw materials
in this packaging can be reused or recycled. Never
place batteries in your household refuse, in fire or in
water. Batteries should be collected, recycled or dis-
posed of by environment-friendly means. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council.
16. Troubleshooting
Trouble Possible cause Solution
1. Saw blade
comes lose when
turning off the
engine
Fastening nut is not suf-
ficiently tightened
Tighten fastening nut (right-hand
thread)
2. Engine cannot
be started
a) Breakdown of the main’s
fuse
a) Check main’s fuse
b) Defective extension
cable
b) Replace extension cable
c) Defective motor or
switch connection
c) Have the device checked by a
qualified electrician
d) Defective engine or
switch
d) Have the device checked by a
qualified electrician
3. Wrong direction
of rotation
a) Defective capacitor a) Have the device checked by a
qualified electrician
b) Incorrect connection b) Have the polarity of the wall
socket replaced by qualified
electrician
4. Engine does
not provide power,
fuse is tripped
a) Cross-section of the ex -
tension cable insufficient
a) see Electrical connection
b) Overload caused by a
blunt saw blade
b) Replace the saw blade
5. Burn areas on
the cut surface
a) Blunt saw blade a) Sharpen or replace the saw
blade
b) Incorrect saw blade b) Replace the saw blade