Scheppach 39048029914, Instruction Manual

Page: 32 / 120

32 GB
• Keep in mind that there is risk of injuries in the area
of the cutting device intended to cut off the line.
• CAUTION: The cutting tool continues rotating for a
few seconds after the engine is turned off.
• Put the tool down only after the cutting tool has
completely stopped and the motor is turned off.
• When the cutting tool is damaged, it must be re -
placed at once.
• Always use the original line only. Never use a metal
wire instead of the nylon line.
• Tool and cutting tools must be properly inspected
and serviced periodically. Damages must be re-
paired by a service center.
• Only use accessories recommended by the manu-
facturer. See Maintenance/Accessories
• Never use metal multi­piece cutting blades, cutting
tools with spinning chains or flail blades.
• Have your tool serviced only by qualified person -
nel and by use of original spare parts only. This
ensures that the tool will work safely in the future.
Residual risks
There will always be residual risks, even if you use
this equipment according to instructions. The follow
-
ing hazards can occur in connection with the con -
struction and design of this tool:
•
Health hazards resulting from swinging of hand
and arm if the equipment is used for an extend
-
ed period and if it is not operated or maintained
properly.
• Injuries and material damage caused by ejection
of tool attachments which are unexpectedly thrown
from the equipment because of sudden damage,
wear and tear or improper attachment.
• Warning! This tool generates an electromagnetic
field during operation. Under certain circumstanc -
es, this field can affect active or passive medi -
cal implants. In order to reduce the risk of severe
or fatal injuries, we recommend that people with
medical implants consult their doctor and the man-
ufacturer of the medical implant before operating
the machine.
• Always start the cut with the saw chain running.
Make the cut in such a way that the saw does not
get jammed in the wood.
• Use the gripping spikes for every cut as the start -
ing point and always start the cut with the saw
chain running. Make the cut in such a way that the
saw does not get jammed in the wood.
• Pay particular attention to branches under tension.
• Always pull the tool out of the wood when the saw
chain is running.
• Never work with the tool above shoulder height or
with only one hand.
• Always stand away from the falling direction. Posi-
tion yourself on a slope above the tree to be felled.
• Always stand sideways when carrying out sawing
work on a tree which is located on a slope, never
work from above or below.
• Always look out for the falling direction of the parts
which are cut off.
• Never start the cut with the bar tip and never cut
with the bar tip.
• Risk of kickback! There is always a risk of kickback
when the bar tip touches the wood or other objects.
This makes the chainsaw uncontrollable and it may
be thrown towards the operator with great force.
• Do not use the tool as a lever to move objects.
• Always use the chain guard during transport and
storage.
• Secure the tool during transport in order to prevent
loss of fuel, damage or injury.
• Warning!
Keep passers­by away from running equipment but
never work by yourself.
• Keep within earshot of others in case you need
help.
• Stop the engine immediately when someone ap-
proaches you.
• Make sure that the saw chain does not come in
contact with foreign objects such as stones, fenc
-
es, nails and similar. These objects could be eject -
ed and injure the operator or passers­by or dam -
age the saw chain.
• National specifications may restrict the use of the
pole saw.
• Do not use the machine within 10 metres of a posi-
tion from which it can reach high-voltage cables.
Before working on the tool itself (e.g. transport,
set-up, retooling, cleaning and maintenance),
disconnect the spark plug cap!
Always attach the transport guard straight away.
6. Technical data
RPMT330
Technical data
Cutting data grass trimmer
Cutting circle diameter of line mm
430
Cutting line diameter mm
2 x 2.4
Cutting line length m
4
Maximum speed grass trimmer
min
-1
5900
Cutting data brush cutter
Cutting circle diameter of blade mm
255
Cutter balde thickness mm
1.4
Teeth quantity 3
Maximum speed brush cutter min
-1
7200
Cutting data hedge trimmer
Cutting circle diameter mm
24
Angle adjustment °
+90°/0°/­75° (165°)
Cutting length mm 400
Max. cutting speed max. min
-1
1550
Cutting data pole saw
Guide bar length mm
305
Cutting length mm
254
Guide bar type
Oregon 100SDEA318
Chain pitch "
3/8"
Saw chain type
91PJ040X
Chain link thickness mm
1.27
Oil tank capicity cm
3
125
Power unit