Schenker N151RF1, User Manual

Page: 197 / 292

Troubleshooting
Problems and Possible Solutions 7 - 11
7
The Wireless LAN/Bluetooth modules
cannot be detected.
The modules are off as the computer is in Airplane Mode . Check the LED
indicator to see if it is in Airplane Mode (see “LED Indicators” on page 1 -
10 ). Use the Fn + F11 key combination to toggle Airplane Mode on/off (see
Table 1 - 4, on page 1 - 16 ).
The PC Camera module cannot be
detected.
The module is off. Press the Fn + F10 key combination in order to enable the
module (see “Function Keys & Visual Indicators” on page 1 - 16 ). Run the
camera application to view the camera picture.
The Wireless LAN/Bluetooth modules
cannot be configured.
The driver(s) for the module(s) have not been installed. Make sure you have
installed the driver for the appropriate module (see the instructions for the
appropriate module in
“Wireless LAN Module” on page 6 - 2 and/or
“Bluetooth & WLAN Combo Module” on page 6 - 12 ).
A file cannot be copied to/from a
connected
Bluetooth device.
The transfer of data between the computer and a Bluetooth enabled device is
supported
in one direction only (simultaneous data transfer is not
supported) . If you are copying a file from your computer to a Bluetooth enabled
device, you will not be able to copy a file from the Bluetooth enabled device to
your computer until the file transfer process has been completed
No sound can be heard through an HDMI
connected display.
You have not configured the HDMI audio output . See “HDMI Audio
Configuration” on page C - 9 .
Audio Volume is too low when listening
through headphones .
You have set the Speaker Configuration to 5.1 or 7.1 Speaker . It is
recommended that you set the Speaker Configuration to Stereo (not to 5.1 or
7.1 Speaker) when listening through headphones in order to maximize audio
quality. See
“Audio Features” on page 2 - 7 .
Problem Possible Cause - Solution