14
Menu options:
•
WORKING TIME (timer)
It allows to select the working time of the watermaker (1-6 hours).
The timer is activated if the START button is pushed for more than 3 seconds only.
•
BY-PASS
It allows to exclude the sensor (signal pressure switch) that detects the correct cycling of
the ERS. The operation with the by-pass is necessary only in case of malfunctioning of
the signal pressure switch (in example if the system gets blocks, with the message “
SYSTEM BLOCKED
”, not as consequence of a real hydraulic problem, but just as
consequence of the malfunctioning of the probe).
The bypass is used also during special operation like the shut down procedure (washing
with chemicals). The bypass activation is automatically removed after one single
production cycle.
Don’t activate the by-pass if not necessary.
•
AUTOMATIC START-UP.
This function activates automatically the first start up
procedure. The procedure is necessary when a new machine is started for the first time, or
after the filter cartridge replacement, or a general service. The procedure allows to purge
completely the air from the system, and from the seawater and the washing fresh
water hoses. The depressurization valve must be opened before start the
procedure.
•
PERIODIC WASHING
This
function allows a periodic automatic rinsing (every 6-10
days) with fresh water. It can be used before long inactivity periods. The single washing
operation will last about 1 minute. The consumed fresh water, for every washing, is
about 18 liters.
Therefore it is suggested to evaluate if the fresh water reservoir is enough for the
programmed cycles. Selecting NO, the function will be disabled.
To activated the function select the days (6-10), exit from the menu, pushing STOP, and
then push WASHING for 3 seconds.
The display will indicate the remaining day before the first rinsing. The function is
anyway disabled pushing STOP, or after a normal production cycle
.
MESSAGES
SYSTEM STANDBY
It indicates that the system is ready to be set and started.
TOTAL HOURS
It indicates that the total, progressive working time of the watermakers.
SYSTEM WASHING
It indicates that the unit is in washing mode (pumps and electrovalve on).
SYSTEM BLOCKED
