Instruction Manual for Electroblock EBL 252
9
Date: 23.01.2020
8110253 BA / EN
7 Technical details
Dimensions
130 x 275 x 170 (H x W x D in mm), inclu-
ding attachment feet
Weight
Approx. 2 kg
Casing
PA (polyamide)
Colour
Gentian blue RAL 5010
Front
Aluminium, powder coated, light grey (RAL
7035)
Mains connection
230V
~
,
10%, 47 to 63 Hz sinusoidal
Max. power consumption 230V
~
1.9 A
Output voltage
12V DC
Max. overall output current, 12V DC
18 A
Storage temperature
-- 20
C ... 70
C
Operating temperature
-- 20
C ... 45
C
Protection class
I
Protection rating
IP20
Battery types
AGM
Lead-acid
Battery rating
55 Ah or greater
Standby current from leisure battery
With DT ... / LT ... control and display panel
: approx. 4 mA (depending on operator and
control panel used) under the following
conditions
F
No mains connection
F
Leisure battery voltage 12.6V
F
12V main switch ”OFF”
Charging for mains connection
F
Leisure battery
Charging curve
Final charge voltage
Charging current
Voltage for conservation charging
IUoU
Lead-acid: 14,3 V / AGM: 14,7
18 A in the entire mains voltage range, elec-
tronically limited, minus the charging current
into the vehicle battery
13.7V with automatic switchover
F
Starter battery
charge current, conservation charging
Max. 2.6 A
Alternator D+ loading by EBL
Approx. 1 mA
D+ output loading on EBL
Max. 2 A
Solar regulator connector
MNL 3-pin for batt. 1 and batt. 2; e.g.
Schaudt LR 1218
Solar regulator charge current
Max. 20 A
Auxiliary charger connector
MNL 2-pin, e.g. Schaudt LAS 1218
Charge current of aux. charger
Max. 20 A
Renewed charging cycle
For battery voltage below 13.7V
Switchover to main charge
With approx. 5 seconds delay
