2
Situation: 15.06.2005
SDT-0054-00EN
Instruction Manual Electrobloc EBL 99 G
1
Introduction
This instruction manual contains important information for safe operation of
the Electrobloc. It is essential to read and to follow the given safety informa-
tion.
The instruction manual should always be kept in the motorhome/caravan. All
safety information must be passed on to other users.
The reproduction, translation and duplication of this manual, even in parts, is
not allowed without written authorization.
2
Safety information
The design of the Electrobloc is state-of-the-art and according to approved
safety technology. Nevertheless, if the safety information in this instruction
manual is not closely followed, persons might get injured or the Electrobloc
might be damaged.
Do not use the Electrobloc if it is not in technically good order and condition.
The instruction manual must be followed.
Any technical faults affecting the safety of persons or of the Electrobloc must
be dealt with immediately by qualified personnel.
W
Failure to comply with this sign may lead to the endangerment of per-
sons.
W
Failure to comply with this sign may damage the device or the connected
consumers.
W
This sign indicates recommendations or special features.
W
The electrical system of the motorhome or the caravan has to meet
current DIN, VDE and ISO regulations. Manipulations of the electrical
system will endanger the safety of persons and the vehicle, and are
therefore prohibited.
W
Never make any modifications to the Electrobloc.
W
The electrical connection may only be established by qualified person-
nel and must be carried out according to the Schaudt installation
instructions.
W
Connection work is to be carried out in tensionless condition only.
W
Risk of fatal injury due to electric shock or fire in the case of a defective
mains cable or incorrect connection!
W
Risk of fatal injury!
Never perform maintenance on the Electrobloc when it is live.
W
Blown fuses must only be replaced when the cause of the fault is
known and eliminated.
W
Never bridge or repair fuses.
W
Danger of burning! Blown fuses must only be changed on a zero-cur-
rent Electrobloc.
W
Only use original fuses rated as specified in the instruction manual.
