47
will break easily. They will also dry better. Unload the
lower rack first.
* = If provided.
A. Adjusting of the water softener
You must adjust the water-softener manually; please use the water-softener dial.
The water softener removes minerals and salts which may have a negative effect on
the performance of the appliance. The higher these components are the harder the
water is. Adjust the water softener relevant to the water hardness at your residence
as described below:
1.
Open the door and switch on the appliance.
2.
Press the programme button for more than 5 seconds within 60 seconds after
you have switched on the appliance. The water softener setting-mode starts.
The indicator of the water softener and rinse aid goes will flash regularly.
3.
Press the programme button to adjust the water softener. The sequence of the
setting is H1-H2-H3-H4-H5-H6.
4.
Press the ON/OF button to stop the setting.
dH
mmol/l
Setting
Consumption
(g/cycle
)
0-5
0-0.94
H1 (Indicator Rapid)
0
6-11
1.0-2.0
H2 (Indicator 1 h)
9
12-17 2.1-3.0
H3 (Indicator Rapid/1 h)
12
18-22 3.1-4.0
H4 (Indicator Glass)
20
23-34 4.1-6.0
H5 (Indicator Rapid/Glass)
30
35-55 6.1-9.8
H6 (Indicator 1h/Glass)
60
1
0
dH (German water hardness range) corresponds to:
1.25
0
Clark (British water hardness range)
1.78
0
fH (French water hardness range)
0.178 mmol/l.
Manufacturer's setting is H4 (EN 50242).
