Schaller Messtechnik humimeter FS1, Operating Manual

Page: 28 / 32

humimeter FS1 & FS1.1 Operating Manual
Page 28
10. Faults
If the measures listed below fail to remedy any faults or if the device has faults not
listed here, please contact Schaller GmbH.
Fault Cause Remedy
Measuring error The temperature of the ma-
terial being measured is too
low or high. I.e. the material’s
temperature is lower than 0 °C
or higher than +40 °C. The temperature of the
material being measured
has to be between 0 °C and
+40 °C.
Temperature discrepancy
between device and material
being measured Let the temperature adjust
to the material being meas-
ured (permitted difference
of max. 3 °C).
Wrong product type Check whether you have
selected the right product
type (product) before taking
a reading (see
"6. Product
types" ).
Wrong filling quantity Exactly fill in the filling
quantity displayed in the
product type name
(+/- 0.5 gram).
Mouldy or rain wet material The accuracy decreases
significantly.
Stored and fermented corn
from whole grain silage May lead to a too high dis-
played measuring value.
Frozen material or material
mixed with snow The accuracy decreases
significantly.
Contaminated material Highly contaminated mate-
rial such as long ears of
barley or foreign material
can strongly influence the
measuring result.