NBS – Fan coil unit
TECHNICAL DOCUMENTATION
Droplet separator | Mixing unit
NBS-100-1-L4-C5-2-F0-W1
-T0-M0
Construction subject to change.
No return possible.
Version: 06.05.21 | Page 9
DROPLET SEPARATOR
The droplet separator consists of polypropylene leaves and a
rack made of galvanised or stainless sheet steel.
T0
=
without droplet separator (standard)
T1
=
with droplet separator with polypropylene blades
and a rack made of galvanised sheet steel.
T2
=
with droplet separator with polypropylene blades
and a rack made of stainless sheet steel.
---
Droplet separator available for type 150 only
ATTENTION
The use of a droplet separator is obligatory when operating
with condensate
Maximum admissible air flow to prevent condensate
from spreading.
Model
V
(m
3
/h)
-150-1
2520
-150-2
4320
-150-3
5940
MIXING UNIT
The mixing unit consists of galvanised sheet steel and is lined
with sound and heat insulation. The mixing unit allows the air
to be replenished by introducing a fresh air portion.
M0
=
without mixing unit (standard)
M1
=
with mixing unit in air flow direction on the left
M2
=
with mixing unit in air flow direction on the right
---
The mixing unit of the NBS-100 must have a flange
and a flexible connection
---
The mixing unit of the NBS-150 is not compatible
with a flange or flexible connection during the
intake (secondary air)
NOTE
According to the Regulation (EU) 2016/2281, the admissible
external air proportion (ODA) is <10% of the total air volume
(SEK). If you want an external air proportion of ≥10%,
conditioning (heat recovery) is required!
NBS-100
NBS-150
Model
L
(mm)
Front damper
Lateral
damper
-100-1
370
HK 401 x 201
HK 180
201 x 201
-100-2
HK 711 x 201
-100-3
HK 894 x 201
-150-1
1180
HK 503 x 252
HK 180
252 x 252
-150-2
HK 797 x 252
-150-3
HK 1003 x 252
NOTE
Further information can be found in the technical
documentation of the HK multi-leaf damper.
Mixing unit
Flange and
flexible connections
Front damper
Lateral damper
Front damper
Lateral damper
