Line Scan Camera SK2048GJR-4L Manual (09.2016) • shar
ed_Hinweise.indd (09.2016)
2
SK2048GJR-4L
Instruction Manual
(09.2016)
© 2016
Schäfter + Kirchhoff GmbH
•
Hamburg
How to Use this Instruction Manual
Electricity Warning
Assembly and initial operation of the line scan camera must be carried out
under dry conditions.
Do not operate the camera if you notice any condensation or moisture in
order to avoid danger of a short circuit or static discharge!
Risk of High Power Lighting
According to the application, laser or high power LED light sources might be
used. These can affect your eyesight temporarily or even cause permanent da-
mage to the eyes or skin.
Do not look directly into the light beam!
Mechanics Warning
Ensure that the motion device and the scan way is free to move and that no
obstacles are in the way.
Do not place any part of the body in the way of moving parts!
Line scan cameras are mostly used in combination with a motion device
such as a translation stage, a conveyer or a rotational drive, as well as with
high intensity light sources.
For assembly close down these devices whenever possible. Beyond that,
please consider the following warnings:
Safety Warnings
Please read the following sections of this Instruction Manual before unpacking,
assembly or use of the Line Camera System:
• The safety warnings on this page
• Introduction to the system, page 4
• Assembly and initial setup, page 7
Keep this Instruction Manual in a safe place for future reference.
!
