BASCAP_BF_EN
V04 | 08.2019
57
Programming
Parameters: TouchIT configuration
Display text
Setting range
Description
Calibrate display
–
Calibrating display:
During calibration, a cross appears on different positions of
the display.
►
When the cross appears on the display, press and hold
it until the calibration procedure is finished.
Press the touch screen from the bottom (see figure). Press-
ing with the hand facing to the left or right at the same height
as the finger and pressing with the fingertips leads to much
poorer results.
For safety reasons, the Touch Screen glass has a thickness
of 3 mm, meaning that a sensitivity similar to that of a smart-
phone, for example, should not be expected.
It is advisable to calibrate the display if users have pro-
blems with the touch screen. For example, this is the case
if no reaction is triggered when a field is pressed.
Language
All provided languages
Changes the display language.
Beverage button symbols
(A) Text only
(B) Set 1
(C) Set 2
(D) Set 3
Four different symbol sets are available.
►
Select the desired symbol set.
Logo (in Standby mode)
All stored images
Selection from the images stored in the system.
See "Touch screen images".
Cleaning PIN
0-9999
Activates the request for a PIN before cleaning.
►
Enter the PIN number in the field.
PIN request before cleaning.
►
Entry field contains (0000).
No PIN request before cleaning.
(0000) The PIN request is deactivated.
Service PIN
0-9999
Assigns a PIN for the Service menu.
►
Enter the PIN number in the field and confirm.
Timeout for pre-selection
0-999 sec
Sets the time that elapses before a defined standard tab le-
vel is displayed on the touch screen.
►
Make the time setting.
This function is deactivated when set to "0 sec".
Standard tab is defined by the service technician.
