Operation
BASCAP_BF_EN
V04 | 08.2019
38
Transport conditions
CAUTION!
User at risk!
Transporting the coffee machine incorrectly can result in injuries.
Observe the general regulations for health and safety.
►
Before moving the coffee machine, it is essential that you detach the drinking water supply,
power supply and waste water outlet.
►
Before moving the coffee machine, check the floor for obstacles and uneven areas.
CAUTION!
Risk of machine
damage!
Improper transport of the machine could damage the machine.
Adhere to the following instructions when moving machines on a cart:
•
For safety reasons, the cart must be pulled and not pushed when moving the coffee ma-
chine.
•
Only pull on the cart and never on the machine.
•
The cart is not intended for transporting cargo.
Display messages/instructions
The manufacturer cannot be held liable for any damage resulting from unintended use of the
cart or from failure to follow the operating instructions.
Display message
Cause
What to do
Grounds container missing
•
The grounds container was pulled out
(cleaning programme, emptying, etc.).
•
The limit switch is faulty.
►
Insert the grounds container.
►
If the message persists: Contact your ser-
vice partner.
Empty grounds container
The grounds container is full.
►
Empty the grounds container.
Cleaning programme
Appears when a programmed number of bever-
ages has been dispensed without the machine
being cleaned.
►
Carry out the daily cleaning routine (refer to
the "Cleaning" chapter).
Left/right G, beans empty
Appears when the bean hopper is empty or
when a coffee bean has become stuck.
►
Fill bean hopper with coffee beans (max.
1,000 g per hopper) and confirm.
Left/right G blocked
An object (e.g. stone) is stuck in the grinder.
►
Check the grinder for clogging and remove
the remaining beans with a vacuum cleaner
if necessary.
Heating coffee/hot water/
steam
The temperature is 10 °C below the pro-
grammed temperature.
►
Wait until the target temperature has been
reached.
►
If the message persists: Contact your ser-
vice partner.
Filter exchange
The programmed water volume (litres/month)
has passed through the filter.
►
Contact your service partner.
Service instruction
The programmed number of beverages (cups/
month) has been reached. Service is required.
►
Contact your service partner.
Drinking water tank empty
•
Drinking water tank is empty.
•
The float switch is defective.
►
Fill the drinking water tank and place it be-
neath the counter.
►
If the message persists: Contact your ser-
vice partner.
Waste water tank full
•
Waste water tank is full.
•
The float switch is defective.
►
Empty the waste water tank and place it be-
neath the counter.
►
If the message persists: Contact your ser-
vice partner.
