Operation
BASCAP_BF_EN
V04 | 08.2019
30
►
Select [Barista Silver] in the "Screen design" parameter.
►
Select [Options before beverage selection] or [Options after beverage selection] in the
"Group selection" parameter.
►
Set the required number of beverages to be displayed in the "Number of beverages per
group" parameter.
•
1 - 9 beverages
•
1 - 12 beverages when without the [DECAF], [2x], [Barista] pre-selection options
►
Enter the name in the "Group name" parameter.
►
Store an image from the selection list in the "Group button picture" parameter as needed.
►
Perform a "restart" by removing the SERVICE card.
►
After the restart, reselect the "Configuration" menu with the SERVICE card.
►
Open the "Beverage configuration" submenu.
►
Define the beverages in the respective beverage groups.
Configuration example, 4 groups with 6 beverages per group:
This configuration example enables beverage selection which works in two directions
(Group > Beverage or Beverage > Group).
Option 1: Options before beverage selection
The beverage is now selected from the 4 defined groups:
•
Selection (1) from the beverage groups, e.g. Small - Medium - Large + Flavour.
•
Selection (2) from beverage page.
•
Selection (3) from flavour types.
See also "Configuration" - "Beverage configuration".
Configuration of the 1st group (A) should contain all available basic beverages, if possible.
Group A
[Small]
Group B
[Medium]
Group C
[Large]
Group D
[+Flavour]
Espresso
Espresso-1
–
–
Coffee
Coffee-1
–
Coffee 1.1.1
Cappuccino
Cappuccino-1
Cappuccino-1.1
Cappuccino 1.1.1
Latte macchiato
–
Latte macchiato-1.1
Latte macchiato- 1.1.1
Chocciato
Chocciato-1
Chocciato-1.1
–
CoolMacc
–
CoolMacc-1.1
CoolMacc- 1.1.1
