Schaerer Coffe Art Service Manual Download Page 7 | Manualshive

Page: 7 / 60

Schaerer Coffe Art Service Manual Download Page 7

Product description

www.schaerer.com

7

BASCA - EN

Version 03 04.2008

Product description

General

Application

The following beverages can be dispensed using the

Schaerer Coffee Art

:

•  Espresso / Ristretto
•  Coffee
•  Coffee créme / Latte
•  Cappuccino
•  Macchiato / Latte Macchiato (option)
•  Milk foam (option)
•  Hot milk (option)
•  Hot water
•  Steam (option)

Performance features

The machine performance (depending on the programmed fill quantity and model) per hour is:
• Espresso (50 – 60 ml):

± 180 cups

• Coffee (120 ml):

± 150 cups

• Cappuccino (180 ml):

± 130 cups

• Hot water:

± 12 liters

►

Observe the safety instructions on page 56 - 58!

►

The machine must be serviced by a qualified service technician approved by

M. Schaerer

Ltd.

after

40’000

beverages have been dispensed.

► The ambient temperature must not fall below 10ºC or exceed 40ºC.
► The device may not be used in canteen kitchens without express written permission by a qual

-

ified customer service representative approved by

M. Schaerer Ltd.

.

► Noise emission levels can be up to 70db (A), especially while beverages are being heated.

«
...
5
6
7
8
9
...
»

Summary of Contents for Coffe Art





























































Reviews:

No comments