background image

Customer care

www.schaerer.com

56

BASCA - EN

Version 03    04.2008

Safety notes

User safety

Maximum safety is the most important product features of Schaerer equipment. Please comply 

with the following instructions when handling the coffee machine in order to prevent injuries or 

health hazards:

 

Read the user manual carefully before using the device.

►  Do not touch any hot machine parts.
►  Do not use the coffee maker if it is not functioning optimally or is damaged.
► 

Under no circumstances may the installed safety devices be modified!

Health hazard!

Children and persons under the influence of alcohol, drugs or medication or those with physical, 

sensory or mental impairments may not use the device except under supervision.

Risk of scalding!

There is a risk of scalding in the area where coffee, hot water and steam are dispensed. Never 

reach under the outlet while a beverage is being dispensed!

  

Risk of crushing!

There  is  risk  of  crushing  when  handling  moving  components!  While  the  coffee  machine  is 

switched on, never reach into the bean container(s) or into the opening of the brew unit!

Health hazard!

The bean containers and the manual slot may only be filled with the proper materials (coffee 

beans / coffee powder (DECAF) / cleaning tablets) for which they are intended!

Health hazard!

Always read the package warnings and safety instructions before handling and using cleaning 

tablets or cleaning agents. The cleaning tablets and the cleaning agent are irritants. Do not 

add the cleaning tablets or the solution with cleaning agent into the machine until prompted to 

do so on the display. Never mix cleaning products!

Risk of irritation and burns!

Never reach under the outlets during a cleaning cycle! Cleaning fluid comes out of the outlet 

during cleaning cycles.

  

Caution, electrocution!

 

Only skilled electricians may carry out work on electrical systems.

 

The device must be connected to a secured circuit. (We recommend using an earth leakage 

circuit breaker in the connection).

 

All relevant guidelines on low voltage and/or country-specific or local safety regulations and 

laws must be observed.

 

The connection must be grounded according to regulations and safeguarded against elec-

trocution.

 

The voltage must correspond to the data on the device’s serial plate.

 

Never insert the power plug into the socket while it is wet or touch it with wet hands!

 

Never touch energized parts!

 

Before carrying out service work, always switch off the main switch and/or disconnect the 

device from the power supply system.

 

The power cord may only be replaced by a qualified service technician.

  

When  choosing  cleaning  products,  please  pay  attention  to  their  environmental  friendliness, 

health risks, disposal requirements and any local options for proper disposal. Neither the machine 

nor its components may, under any circumstances, be disposed of in refuse bins intended for 

household waste!

  

Health hazard!

The coffee machine must be installed by the operator so that there are no impediments to care 

and maintenance. In both self service and full service applications, trained personnel must su-

pervise the machine in order to ensure that the care instructions are observed and personnel 

are available for questions regarding use.

  

Risk of burns!

Do not touch any part of the dispensing equipment except the grips provided for this purpose! 

The brew unit may only be cleaned when the coffee machine is cold. The brew unit can be-

come hot!

Summary of Contents for Coffe Art





























































Reviews: