- 10 -
User Manual | 05.2015 | v01
www.schaererusa.com
Utility Hook-Up Requirements
G
Y
X
Notes:
Access hole is only required if any of the utility hook-ups are located under the counter. Drain pipe is only necessary if the drain line
from the drain tray is mounted fixed. A removable drain tray does not require a drain pipe since it will be emptied by the operator.
2" [55mm]
4" [102mm]
22"
[560mm]
3"
[80mm]
DIAMETER
ACCESS HOLE
28" [712mm]
(including top and
bottom clearance)
30"
[762mm]
38" [965mm]
(including top
clearance)
17" [432mm]
The receptacle (NEMA L6-30R)
and Water Filter can be located
either under the counter or top of
counter behind the machine.
25" [635mm] (including rear clearance)
3"
[80mm]
22" [560mm]
POWER, WATER SUPPLY, AND ACCESS REQUIREMENTS
The receptacle, water
shut-off valve and drain
pipe must be within 3 feet
(36
"
) of the center of the
location (footprint) of the
machine.
Ideal under counter
space for softener: 30
"
(minimum requirement:
26 inches).
• Receptacle type: NEMA L6-30R.
• 3 Prong twist-lock.
• Breaker panel: 30 Amp dedicated 220V
single phase circuit.
• Actual maximum load: 24 Amps.
• Access hole with collar (no sharp edges).
• Located centrally under machine for water
and drain hose.
• Diameter: Minimum 3
"
(80mm).
• Water shut-off valve with 3/8
"
(9.5mm)
compression fitting.
• Back flow preventer in accordance with
local requirements.
•
Drain pipe to floor drain.
• Copper or PVC in accordance with local
health codes and regulations.
• Diameter: 1.5
"
(38mm) or larger.
Utility Hook-Up Requirements
