Schaeffler HEATER Series, User Manual, Page: 13 / 30

Schaeffler Technologies
13
■
Ensure that the power supply cable cannot come into
contact with the workpiece to be heated. Insert the plug in
a grounded socket outlet with connection.
■
Switch on the device by means of the main switch. The
machine briefly shows “Test”, and the display shows a “pre-
set end temperature” programmed by the manufacturer.
■
Connect the temperature sensor by inserting the plug
into the socket. Make sure that the – and + of the plug
correspond to that of the socket.
■
The induction heater is now ready for use in the
temperature mode.