SCH.E.I.D.L Energy Controller, Installation Manual, Page: 21 / 40

SCH.E.I.D.L Energy Controller
Page 21 of 40 Installation Manual Data­Logger
EN
1
Connect the meter
S
0
Counter Adapter IS0
for electricity, water, heat quantities
or drinking water meter, length: 0.2 m
Order Code: 4260376260040
1 Bus for sensor
2 S
0
+
3 S
0
­ / Ground
4 +12V Output
The optional adapter allows a measu­
rement of consumptions. Prerequisite
is a meter with S
0
output to record the
pulses.
Several adapter, also mixed with tem­
perature sensors can be daisy­chai­
ned to a single bus cable.
In CHP, heat pumps, or for loads, the
running times and the efficiency can
be determined.
S
0
Counter Adapter
2
Connect the adapter
2.1 Put the adapter on your
controller. A green LED on the
adapter flashes with each
pulse
1.1 Connect the terminals S
0
+ and
S
0
­ of the meter with those of
the adapter.
Warning Danger: Don´t connect
3
Instruments display
3.1 After about some seconds,
the instruments for power
[kW] and summed energy
[kWh] appear
3.2 In Settings → Datapoints →
Meter, adapt the pulses / kWh
and units
the 230V of a power meter to
the S
0
adapter! Connection
only by qualified personal
Ac
ce
ss
or
ie
s