SCH.E.I.D.L Energy Controller, Installation Manual, Page: 20 / 40

SCH.E.I.D.L Energy Controller
Page 20 of 40 Installation Manual Data­Logger
EN
Buffer temperature sensor 3­way
for hot water tank
Length: 2.5 m, for 2m high buffer
Order Code: 4260376260071
The optional multi­sensor allows pre­
cise monitoring of heat­storing e.g. for
drinking water, Solar stratified storage
tank or in cogeneration plants. The
stratification is detected by three sen­
sors that are plugged together via a
cable. Thanks to the magnetic attach­
ment to the tank, the sensors are ea­
sy to install.
Is represented with the temperatures
of the buffer layer, the energy contai­
ned in kWh, and the charge / dischar­
ge power in kW.
Since the buffer is the central compo­
nent of modern regulated heating in­
stallations, storage losses and losses
in the system can be found quickly.
1
Mechanically fasten
Buffer temperature sensor
2
Connect the buffer temperature sensor
2.1 Put on the buffer temperature
sensor to the controller, if ne­
cessary behind other sensors
1.1 Baste the magnetic sensor at
the top (with flags), center and
bottom directly on the steel
tank under insulation
3
Instruments display
3.1 The instruments of power,
energy and temperatures
appear in the dashboard
3.2 In Settings → Datapoints →
Buffer, set the volume and
temperatures
Ac
ce
ss
or
ie
s