Scarlett SC-WM4000, Instruction Manual

Page: 3 / 13

·
Let the water drain off from the soft pipe completely.
INSTALLATION
·
Make sure that the washing machine is on a strong and flat place.
·
The distance between the washing machine and the wall should be more than 5 cm in order
not to be noisy.
·
The socket must be installed earth connector and 3A-safety rube.
·
Place the washing machine where the power supply and water supply are conveniently near.
Easy drainage of the water after washing must also be considered.
·
Attached the water inlet hose to the water inlet.
·
Push the spring clamp to the drain hose and connect the drain hose to the outlet of the
washing machine, then secure the drain hose joint by fastening the spring clamp.
·
The drain hose should be placed flat on the ground. Water flow will be blocked if any portion
of the drain hose is raised 20 cm from the ground.
ELECTRIC WIRING DIAGRAM