OPERATION
PREPARING THE WASH
·
Take out the key, fastener, coins and such things from the clothes.
·
Turn the lining out before you wash the clothes with fuzz.
·
Put the clothes into a nylon net if they are diaphanous.
·
Wash smeary or tint clothes separately.
·
Separate the laundry into different groups like: white clothes, colour clothes, delicate clothes
and etc. Wash the laundry according to the washing guide.
·
Clothes with worn patches or tears should be mended first.
·
Process spots according the Spot removing section.
·
Check that the wash timer knob is set to the
position and the selector switch is set to the
mode.
·
Insure that the drain hose is placed flat on the ground.
·
Plug in the power cord and switch on.
WASHING TECHNIQUE
·
Place the wash load and detergent in the wash tub.
·
The total weight of clothes should be less than the fixed capacity.
·
Set the selector switch to the
mode.
·
Turn the water tap on and fill the wash tub to the level recommended in the Laundry Guide .
·
Set the wash timer to the wash period recommended in the Laundry Guide . Your machine
will now wash for the period selected. When the wash period expires, set the selector switch
to the
position to discharge the water.
TO RINSE IN THE WASH TUB
Overflow Rinse
·
Set the water inlet knob to the
.
·
Turn the water tap on.
·
When the rinse water becomes clear, turn off the water tap.
·
Set the selector switch to the
position to discharge the water.
TO RINSE IN THE SPIN TUB
Spin Tub Rinse
·
Set the water inlet knob to the
.
·
Turn the water tap on.
·
Set the selector switch to the
position to discharge the water.
Spin drying
·
To open the inner safety lid of the spin tub, lift up the outer spin cover then lift up the safety
lid.
·
Transfer the wash load to the spin tub commencing with small articles. Ensure that the
clothes are evenly distributed and hold down the clothes.
·
Close the inner safety lid then the spin cover.
·
Set the spin timer to the time recommended in the Laundry Guide . The spin tub will spin for
the time selected then stop (at the
position).
·
To remove or reposition clothes during the spin dry cycle, open the spin cover and inner lids.
In this case, the spin tub will automatically stop as a brace is activated when the spin cover
is open. To restart, close both lids. If required, reset the spin timer.
·
If there is any abnormal vibrating during spin-drying, turn off the spin timer and rearrange the
clothes inside the spin tub.
Summary of Contents for SC-WM4000
