Scarlett SC-VC80C99 Instruction Manual Download Page 4

IM020 

www.scarlett.ru

  

 

 SC-VC80C99 

 

GB

   INSTRUCTION MANUAL 

IMPORTANT SAFEGUARDS 

 

Read this instruction manual carefully to prevent any unit damage or injure when using. 

 

When using this appliance, basic precautions should always be followed: 

 

Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains 

voltage in your home. 

 

For home use only. Do not use for industrial purposes. 

 

The appliance is intended for use only in domestic aims. 

 

To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has 

happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center. 

 

Do not handle the plug with wet hands. Never switch off the appliance by pulling the cord. 

 

Do not let the cord hang over sharp edges or touch hot surfaces. 

 

Always unplug the appliance from the power supply when not in use and before servicing. 

 

In case of power cord is damaged, its replacement should be done by the manufacture or service department or 

the other high-skill person to avoid any danger. 

 

To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to 

direct sun light or near any heater. 

 

The appliance  is not intended for use for physically, sensory or mental disabled person (including children) or for 

person with lack of life experience or knowledge, if only they are under supervision or have been instructed about 

the use of the unit by responsible person. 

 

Children must be under control in order not to be allowed to play with the appliance.  

 

To avoid damage of the flexible hose, do not fold or pull it strongly. 

 

Do not put any object into air outlets. Do not use with outlet blocked. Keep free of dust, hair and anything that 

may reduce airflow. 

 

Be careful when cleaning on stairs. 

 

Before you start using the vacuum cleaner, please remove all  large or sharp objects from the floor in order to 

prevent damage of the unit. 

 

CAUTION: To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power 

supply at the same time. 

 

Never use the vacuum cleaner without filters. 

 

Do not use the appliance on wet surfaces. This unit does not absorb water. 

 

If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it. 

 

Never use the appliance without dust bin. Replace the dust bin without delay if it is damaged. 

 

Do  not  attempt  to  repair,  adjust  or  replace  parts  in  the  appliance.  Repair  the  malfunctioning  appliance  in  the 

nearest service center. 

 

If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature 

for at least 2 hours before turning it on. 

 

The  manufacturer  reserves  the  right  to  introduce  minor  changes  into  the  product  design  without  prior  notice, 

unless such changes influence significantly the product safety, performance, and functions. 

 

Manufacturing  date  is  indicated  on  the  unit  and/or  on  packing  as  well  as  in  accompanying  documents  in  the 

following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX 

is the year of production. 

PREPARATION 

 

Unpack the device and remove the sticker from the body. 

 

In order to connect the hose to the vacuum cleaner insert hose base into sucking inlet and press gently until it 

clicks. In order to disconnect the hose press two locks located at hose base sides. 

 

Insert the hose into the tube. 

 

Attach one of the nozzles to the tube: 

 

The  "FLOOR/CARPET"  combined  nozzle  is  designed  for  carpet  mats  and  similar  floor  coatings,  and  for  flat 

surfaces; 

 

The  "FURNITURE/SLOT"  nozzle  is  designed  for  cleaning  upholstered  furniture,  curtains  and  decorative 

surfaces. 

INSTRUCTION FOR USE 

 

"Cyclone" system ensures maximum power during cleaning. 

 

Before starting, unwind the cord to sufficient length and insert the plug into the power supply. The yellow mark on 

the cord shows optimal cord length. Do not unwind the cord beyond the red mark. 

 

Press On/Off button to switch the unit on and press again to stop it. 

 

You can adjust the air flow using the air flow regulator on the flexible hose handle: 

 

Decrease flow for cleaning curtains, books, furniture, etc. 

 

Increase flow for cleaning bare floor. 

 

To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing 

damage. 

 

WARNING! 

 

Be sure to clean the container after each cleaning. 

Reviews: