Scarlett SC-JE50S59, Instruction Manual

Page: 6 / 44

IM022
www.scarlett.ru SC-JE50S59 6

The manufacturer reserves the right to introduce minor changes into the product design
without prior notice, unless such changes influence significantly the product safety,
performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of
production, and following four figures XXXX is the year of production.
FEATURES OF JUICER

When working with slow juicers, juice proved to be with pulp, this juice contains more useful
elements.
 The juicer is easy to operate and easy to clean.
PREPARATION FOR USE

The juice extractor is used for preparation of fresh juice of vegetables, fruits, greenery, berries
and fruit sorbet as well.

Unpack the unit and check the unit and accessories for damage.

Thoroughly wash and dry all parts that come into contact with food.
 Wipe the outside surface of the housing with slightly damp cloth.

Wash vegetables/fruits thoroughly. Peel fruits and remove seeds, cut fruits into small pieces
that would easily fit into the feeding funnel.

Do not use the juicer for making coco, banana, avocado juice.
 Use the juicer for making juice from:
- Fruits: apples, oranges, pineapples, date plums, avocado, peach, mango, etc.
- Vegetables: both for hard ones (carrot, beet, cabbage, potato, batata, Canada potato),
both for soft ones (cucumber, pepper, onion, garlic), etc.
- Berries: strawberry, raspberry, pomegranate, grapes, currant, gooseberry, bilberry, etc.
- Greenery: celeriac, puppet, fennel, aloe, ginger, etc.
- Leguminosae: soybeans.
 From hard and juicy fruits (carrots, greens, oranges, berries) the juice is proved to be liquid;
from soft fruits (tomatoes, pears, peaches, etc.) - the juice is proved to be puree; the
consistency of apple juice depends on its hardness.
 To obtain juice of maximum purity it is recommended to use the amount of the product no
more than one glass. Do not use the product more than to get juice in one glass, as this can
lead to malfunction of the device.
ASSEMBLY/DISASSEMBLY
DISASSEMBLY:

Disconnect the appliance from mains.

Remove the neck rotating it counter-clockwise towards the position on the unit.

Remove the plastic housing part.

Remove the screw with filter rotating it counter-clockwise.
ASSEMBLY:
 Before assembly, make sure that the appliance is disconnected from mains and the motor is
not running.

Set the transparent plastic part to the juicer body.
 Check that the cake plug is closed.

Then install the screw by turning it fully clockwise.

Set the neck so that the mark coincides with the mark on the top of the case, scroll to the
position at the level of the mark .
OPERATION

Before operation, make sure that the neck is fixed firmly.
 Connect the juice extractor to mains.

Place the juice container under the juice spout. Place the cake container under the cake
spout.
 To switch the juice extractor on, set the I/O/R switch into the "I" position.
 Load prepared fruits or vegetables into the juice extractor and gently press them with the
pusher. NEVER PUSH FRUITS/VEGETABLES BEING LOADED INTO EXTRACTOR WITH
FINGERS OR OTHER FOREIGN OBJECTS!