IM020
SC-EK21S80
4
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read these operating instructions carefully before connecting your kettle to the power supply, in order to
avoid damage due to incorrect use.
Before switching on the appliance for the first time please check if the technical specifications indicated on the
unit correspond to the mains parameters.
Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
The appliance is intended for use only in domestic aims. The unit is not intended for industrial and commercial
use, and also for use in:
kitchen area for the stuff of shops, offices and the other industrial places
farm houses
hotels, motels, rest homes and other similar places by residents.
Always unplug the appliance from the power supply when not in use.
Keep the base unit away from water and protect from splashes.
Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall
socket immediately and have the unit checked by an expert before using it again.
In case of power cord is damaged, its replacement should be done by the manufacture or service department or
the other high-skill person to avoid any danger.
Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under
curtains and shelves.
Do not leave the appliance unattended when in use.
The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for
person with lack of life experience or knowledge, if only they are under supervision or have been instructed about
the use of the unit by responsible person.
Children must be under control in order not to be allowed to play with the appliance.
Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
Never take the kettle from its base while in operation. Switch the appliance off first.
Electric kettle with button in turn-on position is forbidden to put on the base.
ATTENTION: Do not open the lid while water is boiling.
ATTENTION: During the operation, the appliance heats up. Be careful! Do not touch the body of the unit while it
is working. To avoid skin burns with hot steam, do not bend over the unit during opening the lid.Close the lid
properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may
overflow.
The kettle is for heating water only, not for any other purposes and liquids.
Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the
nearest service center.
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature
for at least 2 hours before turning it on
The manufacturer reserves the right to introduce minor changes into the product design without prior notice,
unless such changes influence significantly the product safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the
following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX
is the year of production.
BEFORE USING FOR THE FIRST TIME
Kettle is suitable for boiling water.
To remove the foreign smell from the new unit before the first use boil the water with added juice of 1-3 lemons or
a pack of citric acid.
Leave the fluid in the unit for 12 hours, then boil again.
Pour the solution out and rinse the kettle inside carefully avoiding fall water on the electric contacts.
Repeat the procedure if necessary.
INSTRUCTION FOR USE
FILLING
Remove the kettle from the base unit.
You can fill the kettle with water via the spout or neck with opened lid.
Do not fill the kettle with less than 0.5 l of water (less than “MIN” mark) to prevent it from operating dry and more
than 1.7 l (up to “MAX” mark) to avoid overfilling and water spilling out during the boiling.
SWITCHING ON
After filling with water, place the kettle on the base unit.
Connect the plug to the power supply and push On/Off switch. The appliance will turn on and indicator will light.
SWITCHING OFF
When water begins to boil, the kettle will switch off automatically and indicator light will go off.
