Scarlett SC-2167, Instruction Manual

Page: 4 / 25

IM013
www.scarlett.ru SC-2167 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
•
Please read this instruction manual carefully before use and keep in a safe place for future reference.
•
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
•
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.
•
Do not use outdoors.
•
Always unplug the appliance from the power supply before cleaning and when not in use.
•
To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids. If it was
happened DO NOT TOUCH the appliance, unplug it immediately and check in service center.
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliances by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Do not use other attachments than those supplied.
•
If the power cord is damaged it should be replaced by the manufacturer or authorized servicing center or qualified
professional for safety reasons.
•
Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
•
Keep the cord away from sharp edges and hot surfaces.
•
Do not pull, twist, or wrap the power cord around appliance.
•
Unit surface temperature of the appliance is high, thus do not touch it, except the handle.
•
Operating unit should be far away from the flammable or easy bulging under high temperature objects. The convector
must not be located immediately below a socket-outlet.
CAUTION:
•
Do not cover the appliance when it is in use.
•
To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
•
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at
least 2 hours before turning it on.
•
The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless
such changes influence significantly the product safety, performance, and functions.
FLOOR INSTALLATION
•
Turn over the convector, attach wheels to the bottom end of the appliance, make sure that the bolt holes are properly
aligned, then tighten the bolts (supplied).
•
Place the convector on floor.
WALL INSTALLATION
•
Attach brackets to the wall using the supplied bolts and nuts.
•
Install the convector, leaving at least 50 cm between the appliance and the floor, and make sure that the distance
between the appliance and upholstery and/or curtains is at least 1 meter.
SWITCHING ON
•
Insert the plug into a suitable power outlet, and set the power switch to "I" position. The operation indicator will light.
DISPLAY INDICATION
LOW POWER
HIGH POWER
LOCK
OPERATION
TIMER
TEMPERATURE
CLOCK
SETTING POWER LEVEL
•
Press the "POWER" button on the control panel, the appliance will start operating in low power mode.
•
Press the "POWER" button on the control panel again, the appliance will start operating in high power mode.
TIMER SETTING
•
Press the "TIMER" button located on the control panel.
•
Press the "+" or "-" buttons to set the timer.
•
The timer can be set within the range of 1 to 24 hours (with 1-hour increment). The timer will start operating 5 seconds
after the time is set.
•
When the set time elapses, the convector will switch off.