Scarlett SC-135S, Instruction Manual

Page: 4 / 24

IM019
www.scarlett.ru SC-135S 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read the instruction manual before use and save it for future references.

Before the first switching on check that voltage indicated on the rating label corresponds to the mains
voltage in your home.

For home use only. Do not use for industrial purposes. Use the steam iron only for its intended use.

Do not use outdoors or in damp area.

Never pull the cord while disconnecting from the power outlet; instead, grasp the plug only and pull to
disconnect.

Do not allow the cord to touch sharp edges and hot surfaces.

Always unplug the steam iron from the power supply when filling with water or emptying and when not in
use.

To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has
happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.

In case of power cord is damaged, its replacement should be done by the manufacture or service
department or the other high-skill person to avoid any danger.

The appliance is not intended for use for physically, sensory or mental disabled person (including children)
or for person with lack of life experience or knowledge, if only they are under supervision or have been
instructed about the use of the unit by responsible person.

Children must be under control in order not to be allowed to play with the appliance.

Do not attempt to repair, adjust or replace any parts of the appliance. Check and repair the malfunctioning
appliance in the nearest service center only.

Do not leave the iron unattended while hot or connected or on an ironing board.

If ironing is interrupted, stand the iron on heel rest only, do not place the steam iron on metal or rough
surfaces.

Iron should be used and stored on a flat, stable surface.

Iron should not be used if it is dropped, if there visible signs of damage or if it leaks.

CAUTION: To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design without prior notice,
unless such changes influence significantly the product safety, performance, and functions.

Production date mentioned on the unit and/or on the packing materials and documentations.
IRON SOLEPLATE

The "SimplePro' soleplate is the advanced invention of Scarlett specialists, which provides easy ironing and
protects fabric gently.

The easy glide is provided by the "steam cushion", which is formed due to the optimized steam hole pattern.

Now your clothes are secure! The polymer non-stick coating protects fabric from burning.
BEFORE THE FIRST USE

Some parts of the steam iron have been slightly greased and as a result the iron may slightly smoke when
switched on for the first time. After a short time this will cease.
HOW TO USE
SETTING TEMPERATURE

Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these
instructions in all cases.

Turn the temperature control dial round to set the appropriate temperature indicated in ironing instructions
or in fabric label.
LABEL TYPE OF TEXTILE
Do not iron this article
•
Synthetics, Nylon, Acrylics, Polyester, Rayon
••
Wool, Silk
•••
Cotton, Linen
Maximum temperature (Steam)

Insert the mains plug into the wall socket. The indicator light will turn on.

When the indicator light goes out you may start ironing

If you set the temperature control to lower setting after ironing at a high temperature, it is not recommended
to iron before the pilot light switches on again.
WATER TANK FILLING

Unplug the iron before filling the water tank.

Hold the steam iron in horizontal position.

Slowly pour water through the water inlet.