Scarlett SC-132S, Instruction Manual

Page: 5 / 24

www.scarlett-europe.com SC-132S 5
CAUTION: If the steam iron has been used for a long time, is hot and there is no water. Do not refill it with water
until the steam iron has cooled down.
BURST OF STEAM
·
The burst of steam feature provides additional steam for removing stubborn wrinkles.
·
Turn the temperature control dial to the or position.
·
Turn the variable steam control to the maximum position.
·
Press the powerful steam button to release the burst of steam.
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button pressed for more than
5 seconds.
ANTI-DRIP FUNCTION
·
In this case the anti-drip function automatically activates to prevent vaporization, so that you may iron the most
delicate fabrics without the risk of spoiling or staining them.
ANTI-CALC FUNCTION
·
Your steam iron has anti-calc function that protects your appliance from scale.
WHEN YOU FINISHED IRONING
·
Set the temperature dial to the minimum position.
·
Remove the mains plug from the wall socket.
·
Stand the iron on heel rest.
CARE AND CLEANING
·
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.
·
Do not use abrasive cleaners.
SELF-CLEANING
·
Fill water reservoir up to the maximum level and then close it.
·
Set the temperature control to its maximum position.
·
Insert the main plug into the wall socket.
·
Allow the iron to heat up until the indicator light goes out.
·
Holding the iron horizontally over the sink then change the steam control to the self-cleaning position and press
the self-cleaning button.
·
Boiling water and steam will be ejected from the holes in soleplate with Impurities washed out. Rock the iron
forwards and backwards during this operation.
·
Repeat self-cleaning if you notice that much impurity has been washed out.
·
Move the iron over an old (preferably) piece of cloth. This to ensure that the soleplate will be dry during storage.
STORAGE
·
Unplug the appliance from the power supply, empty the water tank (do it after each use) and allow steam iron
cool down completely.
·
Wrap the cord around the heel rest.
·
To protect the soleplate, place the steam iron in an upright position on its heel rest.
RUS
·
. ,
.
·
, ,
, .
·
. .
·
.
·
.
·
, .
·
, .
·
, ,
.
·
, ,
, .
,
.
·
.
·
, .
·
.
.
: ,
.
·
,
. .