Scarlett Comfort SC-SF111B20, Instruction Manual

Page: 8 / 8

IM021
www.scarlett.ru SC-SF111B20 8

Always unplug the appliance from the power supply
before cleaning and when not in use.

To prevent risk of electric shock and fire, do not
immerse the appliance in water or any other liquids.
If it has happened DO NOT TOUCH the appliance,
unplug it immediately and check in a service center.

Do not use the device in bathrooms and near water.

Do not place the appliance near heat sources.

Do not leave the appliance switched on when not in
use.

Do not use other attachments than those supplied.

In case of power cord is damaged, its replacement
should be done by the manufacture or service
department or the other high-skill person to avoid
any danger.

Keep the cord away from sharp edges and hot
surfaces.

Do not pull, twist, or wrap the power cord around
the appliance.

Avoid contact with moving parts of the device. Do
not put pencils or other objects through the
protective grid of the fan.

Do not operate without fan installed protective grid.

Do not attempt to repair, adjust or replace parts in
the appliance. Repair the malfunctioning appliance
in the nearest service center.

If the product has been exposed to temperatures
below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce
minor changes into the product design without prior
notice, unless such changes influence significantly
the product safety, performance, and functions.

Manufacturing date is indicated on the unit and/or
on packing as well as in accompanying documents
in the following format XX.XXXX where first two
figures XX is the month of production, and following
four figures XXXX is the year of production.
ASSEMBLING INSTRUCTIONS:

The device is intended for air circulation in the
room.

Fan is packed disassembled. Before assembling
make sure that all the required parts are
undamaged and included into the set.

Do not plug in the device before its assembling is
finished.

Tighten stand tube to stand base with screw. Fix
base cover to stand base with a screw (supplied
with a set).

Unscrew out-joint, put the stand cover and base
cover on the stand base, pull the extension pole out
then tighten the out-joint again.

Place control box firmly on top of extension pole,
tighten screw B.

Unscrew the blade cap by turning clockwise and
rear grill nut by turning counter clockwise and put
both blade cap and rear grill nut off the motor shaft.

Put rear grille on motor shaft.

Secure it with rear grille nut.

Slide blades on motor shaft so that claws on motor
shaft match the blades slots.

Screw blade cap on shaft by turning counter
clockwise.

Put front grille on rear grille and close clips or screw
grille ring to secure grilles together.

Adjust the fan vertically by vertical adjustment
screw.

The fan is ready for work.
OPERATION MANUAL

CAUTION: To avoid electroconvulsive shock or fire
danger, do not operate fan under the conditions of
increased humidity.

Place fan only onto dry flat unyielding surface.

When connecting the appliance to the power
backlight is illuminated. The backlight will be lit for
the entire time of operation of the device.

The fan can work in three speed modes:
“1” For minimum operational speed
“2” For medium operational speed
“3” For maximum operational speed
“0” The fan is switched off

On the upper part of the motor cover there is
oscillating knob. If pressed, it makes the fan cabinet
with blades traverse from side to side. To cancel
oscillating mode push oscillating knob upward.

To switch the
fan off push the button “0”
MAINTENANCE

Before cleaning unplug fan first.

Clean front and rear grilles, blades, stand tube and
stand base with soft moistened cloth and wipe dry.

Do not use abrasive cleansers
STORAGE

Keep the device in normal conditions in dry place.

The symbol on the unit, packing materials
and/or documentations means used electrical and
electronic units and battery’s should not be toss in
the garbage with ordinary household garbage.
These units should be pass to special receiving
point.

For additional information about actual system of the
garbage collection address to the local authority.

Valid utilization will help to save valuable resources
and avoid negative work on the public health and
environment which happens with incorrect using
garbage.