ASSEMBLY / FIXING
•
The Scarecrow B.I.R.D System™ main processor box is typically a traditional wall
fixing using screws/raw plugs (not supplied).
•
Fixing can be either inside or outside depending on client needs and site
circumstances.
•
Ideally the processor should not be positioned too far away from the speaker
locations – this is merely to facilitate ease of installation; if circumstances dictate this
is not possible, consideration then needs to be given to cable choice used (see
below).
•
With the Scarecrow B.I.R.D. System™, speaker placement is vitally important to
obtain the desired dispersal effect over the target area – please see Page 8 under
“System Design”
.
•
The speakers used have fully adjustable mounting brackets (see Page 1) typically
fixed to position with screws/raw plugs (not supplied).
•
The processor box has three separate speaker channels, each of which can take up
to a maximum of 10 speakers each. The speaker channel connections are shown
below:
•
Cabling for speakers is on a “Daisy Chain” basis between speakers, starting from the
processor box.
•
Please see Page 4 under
“Independent Speaker Channel Broadcast”
to determine
how many speaker channels you wish to utilise prior to commencing speaker cabling.
Page 5
