RE-SET FACTORY SETTINGS
•
If you have forgotten your PIN or want to revert the unit back to its factory settings please
follow the below steps:
•
Press and hold N for 3 seconds until the 1- 4 Red LED’s flash enter PIN 4726
•
You now have 15 seconds to complete the following sequence
•
Press S and hold until all LED’s flash twice
•
Press R and hold until all LED’s flash twice
•
Press N and hold until all LED’s flash twice
•
All number LED’s will now scroll down from 10-1 indicating the factory re-set and the system
will switch off.
•
Please note the pin will have now been re-set to the default 10,10,10,10
TECHNICAL SUPPORT
Should you have any concerns about the installation or set up of your system, please
contact either the agent from whom the purchase was made, or Scarecrow Bio-acoustic
Systems direct as follows:
o
Phone: 01825 766363
o
Email:
/
If an item needs to be returned to the manufacturer, the Returns Address is:
Scarecrow Bio-Acoustic Systems Limited
The Old Dairy
Straight Half Mile
Maresfield
East Sussex
TN22 2HH
Page 17
