OTHER FEATURES
Low battery warning
•
If the battery voltage falls below 9v, the system will shutdown to prevent damage to
the battery.
•
The next time the unit is powered up (provided the battery remained connected) the
system will flash code 5 and play “low battery” through the speakers indicating that
a low battery shutdown had occurred.
•
You must recharge the battery.
Low Standby Mode
•
The system will go into a low power standby mode (if enabled) and no broadcast is
running.
•
As standard each unit has low power standby mode activated.
•
The system will go into this mode if no buttons have been pressed for 15minutes, no
broadcast sequence is active during daylight and one hour after sunset has been
detected.
•
A brief press of the power button will bring the system out of this mode.
•
Low standby mode is indicated by a brief flash of the light sensor LED during night
time or a brief flash of the set mode (N, R or S) during day time.
•
To force low power standby to run, press ‘N’, ‘R’ or ‘S’ button to stop the current
broadcast then press power button briefly, after 10 seconds the system should
power down into low power mode.
•
Low power mode is indicated by a brief flash of the power LED, the light sensor led
(if night) or either the ‘N’, ‘R’ or ‘S’ led’s if daytime.
LED meanings
•
All number LED’s flash four times when any button pressed = System locked by PIN,
press N for 3 seconds then enter PIN number.
•
Number LED’s 1-4 flashing continuously = > PIN number entry expected.
•
All number LED’s flash twice after PIN entry = PIN number entry correct.
•
All number LED’s on for 2 seconds = PIN number incorrect or timeout ERROR.
•
All number LED’s scroll down from 10 to 1 after factory reset = Confirmation of reset
to defaults.
•
N,R or S LED flashing indicates that the random timer between broadcasts is running.
•
A single number LED flashing indicates that particular bird is broadcasting.
Page 15