10
Fig.: 2.3
Replacing the contact roller (fig. 2.3)
When replacing the contact roller first dismount the grinding belt as described earlier. Tilt
the contact roller forwards and unscrew the
nuts (U) (see
fig.: 2.3
)
– now dismount the distance bushing. Fit the bearing puller (Å) on
the bearing bracket (W) and turn the spindle clockwise until the bearing bracket is loose
enough to take off the shaft (Y). Then remove the small distance bushings (X) . The
contact roller (E) can now be replaced by another diameter roller. Due to wear and tear the
shaft (Y) must be wiped off properly before the new contact roller is mounted. To mount
the new contact roller (E) please proceed in reverse order. Please use the two nuts (U) to
turn on the bearing bracket (W).
