Scanstrut Ltd. 1 Malt Mill, Totnes, Devon, UK TQ9 5NH
Tel:
+44(0)1803 863800
Fax:
+44(0)1803 862223
e-mail:
website:
www.scanstrut.com
Dual PowerTower Gantry Mount – SC114-40
Installation Instructions
Fitting SC114-40
1.
Install all lights prior to fitting the SC114-40 to the Dual PowerTower.
2.
Gather cables into looms and route through the nearest hole to mounting location,
then out of the holes in the horizontal arms of the SC114-40. The cable looms can
then be routed into one of the water tight cable glands in the back of the Dual
PowerTower.
3.
The SC114-40 fits to the underside of the top plate of the Dual PowerTower. One set
of fixing holes on the SC114-40 will match up with fixing holes of your Satcom
Dome.
4.
With the addition of large washers to spread load use the fixings for the Satcom
Dome to connect the SC114-40, Dual PowerTower Top plate and Satcom Dome
together. Fully tighten all fixings. We also recommend spring washers to ensure
bolts/nuts stay fully tightened.
Kit Contents
[ ]
1 x SC114-40 Gantry
[ ]
1 x Fore Light Plate
[ ]
2 x Ø23mm End Caps
[ ]
3 x PVC Grommets
