SCANMASKIN Scan Combiflex 500i, Manual

Page: 48 / 86

1.5 Range of application
SC-500 is exclusively designed to process horizontal surfaces. SC-500 must not be used
for other purposes than stated in this user guide. The manufacturer will not be liable for
damage or injury resulting from incorrect usage of SC-500. Failure to follow the direc -
tions in this user guide will void the warranty.
Typical applications
• Removal of old coatings, carpets, putty from hard surfaces
•
Removal of undulated concrete surfaces
•
Preparation of the surface for coatings
•
Polishing of the surface
•
Removal of coating defects
• Removal of glue residues
1.6 Scope of supply
The following parts are included with the standard SC-500 grinding machine:
• Key to electrical cabinet
•
Socket key for adjusting the handle
•
User guide
If the machine has got a water connection, the counter part for the connection will be included
and fit in the water connection near the handle.
Machines sold outside of Europe will be either equipped with a local standard connector for
the power inlet or the mating connector will be included and fitted at the main power inlet.
Read “2.6 Electrical safety” before connecting any included connectors.
1.2 Overview
48
www.scanmaskin.com