SCANMASKIN 28 WS, Manual

Page: 74 / 410

1. Specifications
The SCANMASKIN 28 WS is available with different power inputs and some options regarding
wet grinding. This is described in the different sections later on in this chapter.
1.1
Electrical specifications
To find the specifications that apply to your machine, check the information plate on the electri -
cal cabinet door.
Never connect the SCANMASKIN 28 WS to any other voltage or number of phases than de -
scribed in this specification.
The power source must be fused according to “External fuse” in this specification; also, the
cables used must be marked and rated in accordance with the fuse used. Failure to comply
with the correct fuses may cause fire or injuries.
Power choice
1
400 V 3~
2
230 V 3~
Power 7.5 kW (10 hp) 7.5 kW (10 hp)
Current 16 A 50 A
Voltage 380 – 480 V 3~ 200 – 240 V 3~
Frequency 50/60 Hz ± 5% 50/60 Hz ± 5%
External fuse
3
16 A 50 A
Power inlet
4
IEC 60309
3P+N+E 400V
32A
IEC 60309 3P+E
250V 32A
Partnumber Inlet Eu 910842
US 910911
US 910912
Table 11 Electrical specifications
All models are CE-marked.
If using a generator see “2.6.2Using a generator”
1 This refers to different power choices. Note that a Scanmaskin 28 WS made for one choice of power must
be used with that particula r choice.
2
Standard
3
Maximum current for the fuses used in the power source (i.e. the distribution box).
4 This is the standard inlet used. Machines sold outside of EU will be shipped either with a local stand
ard
inlet or an adapter.
74
www.scanmaskin.com