2060534 V2.0
2
Contents
Contents
1. Operation keyboard
3
2. Operator menu operation
5
3. Service menu operation
6
4. Systems settings
8
5. Disassembling of the display 7" LEDD.
11
2060534 V2.0
11
Disassembling
ENGLISH
Attention: How can we back out of the “Front Cam”
menu in case we accidentally activated this?
Answer: There are 2 possibilities:
1.
By activating the yellow wire (which is used as an
handbrake signal in a frontcam setup) or activated blue
wire (which is used to activate the rear camera) you can
be able to get into the menu’s again and disable the
frontcam setting.
2.
Alternatively you can press the option button (5) for
more then 15 second to de-activate the frontcam setting.
Default settings
This option opens the factory defaults menu. Choose the
number of the desired factory settings (1 = standard).
There are 15 possible default settings. If the option ‘reset
default settings’ is selected, the factory settings will be
reset.
Warning:
All user settings will be lost when the factory
defaults are reset.
External device confi guration
This option opens the confi guration menu of an external
device (if possible).
Info
Check in this screen your software version which is
described in this manual.
5. Disassembling of the display 7" LEDD
Step 1
- Remove the suncover by sliding it
upwards in the arrow direction and then forwards.
Step 2
- Insert the U shaped demounting tool into the holes as
shown;
Step 3
- Tweak the dismounting tool in both holes & pull the
screen slightly out of the dash board;
- Pay attention to step 4 before completely removing the
screen from the dashboard:
Step 4
- Do the same thing on the other side;
