3
User Manual
HS10MD
3.3 Standby Mode
The IR Remote only could control POWER on/off.
3.4 Front Button Function
Power
Power on/standby
UP
Up
DOWN
Down
LEFT
Left
RIGHT
Right
ENTER
Select confirm key
MENU
Back to main menu/channel setting
EDID
Copy EDID
LOCK
Button lock
ALL
Set selected input channel to all output
When press ALL the second line of panel will show IN and
flashing, select the input 1~10 then press ENTER
OFF
Turn off selected output, could be 1~10 or ALL
When press OFF the second line of panel will show IN and
flashing, select the input 1~10 or ALL then press ENTER
OUTPUT 1~10
Fast switch output
INPUT 1~10
Fast switch input
3.5 Panel Button Function
OUTPUT 1~10 & INPUT 1~10
Press OUTPUT 1~10 to select output port then the input at IN line of LCM will blink, press INPUT 1~10 to
select input port to switch the channel
ALL
Press ALL button, the IN line of LCM will blink, press INPUT 1~10 to select input port to all output port.
OFF
Press OFF button, the IN line of LCM will blink, press ALL or OUTPUT 1~10 to select which port to turn off
EDID
Press EDID button, it will show “From OUTPUT” at second line of LCM and the channel number will blink,
press OUTPUT 1~10 to select which port to copy EDID.
LOCK
Press LOCK till LOCK LED on then the panel button and IR remote control of MATRIX will be locked. Press
LOCK till LOCK LED off to unlock.
*When the sub-menu setting changed, press the ENTER key to complete the setting. If no press
ENTER key, then the setting will be failed.
