10
User Manual
HS10MD
4.7 ADVANCED
Since some of the notebooks (Ex. SAMSUNG NB) do not output the HDMI signal if failure to read the EDID,
the HOT-PLUG trigger is required to read the EDID again. This menu is mainly to controls the options of the
HOT-PLUG
RX Signal Check (Must be enabled for all below functions)
ENABLE
Enable HOT-PLUG trigger
DISBALE
Disable HOT-PLUG trigger
RX Channel Setting
IN
1
2
3
4
5
6
7
8
9
10
O
X
O
X
O
X
O
X
O
X
Enable/disable HOT-PLUG auto trigger function for each HDMI input.
O- Enable HOT-PLUG auto trigger function.
X- Disable HOT-PLUG auto trigger function.
Trigger Counter
ONCE - Send Hot-Plug request once if no HDMI input
.
ALWAYS - Send Hot-Plug request every 5 seconds if no HDMI input.
Hot-plug All On/Off
Pull low HDMI Input Hot-Plug for 5 seconds manually.
HPG And RXSN All On/Off
Pull low HDMI Input Hot-Plug and close terminator for 5 seconds manually.
