9
User Manual
HS10MD
4.4.4 PC EDID MODE
In this mode you could upload EDID file from RS232 or RJ45 port of PC to MATRIX, please refer user
manual of EDID Loader
.
.
.
.
.
4.5 Remote ID (Default IR ID: 4)
This function must be set to match the Matrix remote control IR01 with the matrix itself. A conflict with
other devices remote control is avoided.
After entering MATRIX IR ID menu, press ENTER, the LCM LINE 1 number will flash. Then Press UP or DOWN
button to select the number, and then press ENTER to confirm.
When finish MATRIX IR ID setting, MATRIX remote control IR01 must also set the same ID
in order to operation in normal.
Remote IR ID setting mode: Press and hold the POWER button, then press the
number button which can be set from 0 to 9, total 10 groups. (See 5.1)
These settings on IR01 remote control have to be done the first time you use the IR01 or when you change
the batteries.
4.6 Version
Display Matrix firmware version
MATRIX IR ID 4
＋
HS10MD
HDMI – IN10
All EDID
HDMI - IN1
All EDID
PC
ED
ID
M
O
D
E
PC
Player - 10
Player - 1
RJ45 Port
RS232 Port
FIRMWARE
VERSION 1.00
