6
User Manual
HKM02BP-4K
IR Remote Control Setting
You could use the IR infrared remote control to preset channel selection and other menu function.
Using the IR remote control aim to the front panel of receiver or external IR receiver cable will be ok.
Initial at first time use the remote control or after change battery of remote control, the IR remote
control and the equipment Remote ID must be using same ID. The default Remote ID for transmitter
is 7, for receiver is 8.
To setting the Remote ID, Press and hold power button, then press button 8 to complete the setting.
+
.
( without transmitter or receiver)
IR Remote Control Button
Symbol
Button
Receiver Function
Transmitter Function
POWER
Turn Off/On Video Output
Connect/Disconnect Receiver
Setup Remote Control ID
MENU
Menu selection, input numbers after press menu button
UP
Increase Value
DOWN
Reduce Value
LEFT
Carry
RIGHT
Decomposition
ENTER
Enter / Show Channel Information
(When no other Menu operation)
Enter
ASTERISK
Cancel
NUMBER
Recall Previous Value
A
Favorite Channel Switching
Set RS232 to Auxiliary Mode to
Receive Menu Message
B
Back to Previous Channel
Set RS232 to Extender Mode
1
Number 1
2
Number 2
3
Number 3
4
Number 4
5
Number 5
6
Number 6
7
Number 7
8
Number 8
9
Number 9
0
Number 0
