4
User Manual
HKM02BP-4K
MSG/IR LED Status Indication
Times
HKM02BP-4K MSG LED
Always ON
IR control, RS232 control, system setting
2
IR control disabled
3
Transmitters channel conflict
4
DHCP server not found
5
Rest to factory default
6
Engineering mode / Firmware update mode
7
Manufacture setting mode
8
Aux system stopped
9
Aux system firmware boot sector error
10
Aux system firmware type error
RJ45 LED Indication
RJ45 LED
Status
Description
LINK (Green)
On
Ethernet connected
ACT (Orange)
Flash
Data transmission
RJ45 Pin Define
Video Link (TIA/EIA-568-B)
1. Orange-white
DATA0 +
2. Orange
DATA0 -
3. Green-white
DATA1 +
4. Blue
DATA2 +
5. Blue-white
DATA2 -
6. Green
DATA1 -
7. Brown-white
DATA3 +
8. Brown
DATA3
–
Cable & Transmission Distance
Link Cable use high quality CAT.5e UTP/STP/FTP or CAT.6 UTP cable
Transmission distance will be affected by equipment (Switch HUB), cable quality…etc.
When using CAT.5e/CAT.6 cable connect transmitter and receiver directly without Ethernet switch, the
maximum transmission distance up to 150M.
You can also use model no: SR01X repeater for extended longer distance or using Gigabit Switch hub
which support IGMP protocol and Jumbo Frame 8K for signal distribution or extend distance.
