SC&T HKM02BP-4K, User Manual

Page: 12 / 35

11
User Manual
HKM02BP-4K
Caution of IR Menu Function

Menu 17 Free Routing function only works in Multicast mode.

Menu 22 When disable USB extender function it will also disable keyboard mouse
function.

Menu 25
Display or hide TV wall setting in the webpage.

Menu 27 You could disable keyboard mouse extender if any compatible issue, it will use
USB extender instead of keyboard mouse extender.

Menu 33 To set customize IR remote, need to be import to RX by RS232 or Telnet
command

Menu 35 For monitors which detect HDMI 5V to enter sleeping mode.

Menu 36 Turn off monitor by CEC command via RX.

Menu 41 Pass-Through means output resolution follow TX EDID, Auto Detect(Per EDID)
means output resolution follow monitor EDID of RX, Customize resolution need to be
setup by RS232 command or web page

Menu 47 Use default EDID at TX side, or copy monitor EDID at RX side. (In multicast mode)

Menu 49 Monitor HDCP version setting, with incorrect HDCP version setting it will show
HDCP fail on black screen.
Option Description
Disable HDCP version follow source and Stream Type of content
HDCP 1.4 Always On Monitor support HDCP 1.4
HDCP 2.2 Always On Monitor support HDCP 2.2

Menu 50 Extender = RS232 extender, Keypad = for RS232 keypad or number key in
terminal software, Auxiliary = auxiliary mode debug, Console = system console debug

Menu 60 Fast Switch mode works best when: resolution, frame rate, scan mode
(interlaced/non-interlaced), color depth, color space, interface (HDMI/DVI), HDCP mode
(ON/OFF) all above are the same.
Disable : Stop link before channel switch, is will show black screen between switching, if
switch to the channel which not exist it will show diagnostic Information.
Enable: Keep link when channel switch, if switch to the channel which not exist may cause
screen freeze 1~2 seconds then show diagnostic Information.

Menu 61 Conflict Check will check TX channel number at booting, reconnection and
before switching, if channel number already existed the connection will be interrupted.

Menu 62 Channel Name will show full name instead of number only, the position of
channel name is center of screen. Channel name can set by RS232 command or import
from telnet port.

Menu 75 Message Redirect forward MENU message to TX RS232 port (Auxiliary mode)
instead of OSD.

Menu 76 Command Redirect run RS232 command from Web or telnet port (Auxiliary
mode).

Menu 80~86 Fix selected function not follow the channel, only available when free
routing enabled.

Menu 90~107 Only available when video wall function enabled..