How to reverse
the door
Tool required: Philips screwdriver, Flat
bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the
unit backwards. You should rest the unit on
something solid so that it will not slip during
the door reversing process.
All parts removed must be saved to do the re-
installation of the door. Do not lay the unit
flat as this may damage the coolant system.
It's better that 2 people handle the unit dur-
ing assembly.
1.
Carefully remove the top hinge cover
with a flat screwdriver.
2.
Unscrew the top hinge with a Phillips
screw driver.
3.
Remove the hole cover with a flat screw
driver.
4.
Move the core cover from left side to
right side. And then lift the upper door
and place it on a padded surface to pre-
vent it from scratching.
5.
Unscrew the middle hinge and then lift
the bottom door and put it on a soft pad
to avoid scratches.
6.
Move the two middle hole covers from
left to right.
